The primarycriteria for maker to get a table tennis table ITTF sanction are condensed
underneath. For more points of interest see the ITTF specialized pamphlet.
4.1. Name of
the table
Each one
table must have a particular name that recognizes it from any possible tables.
4.2. General
appearance of the table
The table
must search proficient suitable for top level rivalry, with no irregularities
or defects. A table that for reasons unknown looks home-made, shaky or shoddy,
paying little heed to the playing characteristics of the tabletop, won't be
given regard.
4.3.
Material of the playing board
For an ITTF
endorsed table, just wood or wooden derivates may be utilized for the playing
board, and the ITTF along these lines favors just wood or its derivates.
4.4. General
table measurements
The length
(l1) must be inside 5 mm of 2.740 m, and the width (b1) and tallness (h1) must
be inside 3 mm of 1.525 m and 0,760 m, separately.
4.5. Net
connection zone
In the event
that the edges of the table are fortified, the securing must be removed where
the net presents are on be joined. The free space between the securing on the
two parts of the table ought to be no less than 70 mm wide, and it ought to
reach out under the table no less than 100 mm.
4.6.
Evenness of the tabletop
The playing
surface must not be twisted.
4.7. Surface
shade, complete and lines of the playing surface
An affirmed
table must be green or blue, of any level of haziness having a Y-esteem under
illuminant D65 of not more than 30% (CIE framework).
The
completion must be uniform over the whole surface; it should accordingly be
connected in some uniform way, for example, splashing or roller covering; brush
imprints are inadmissible. The completion will additionally be unsuitable if,
paying little respect to the measured level of gleam, it allows the state of a
light-source to be recognized in its appearance.
The
completions may not exchange surface shade to the ball. This reasons concern to
players, onlookers and TV groups.
Notwithstanding
the foremost complete, the playing surface must be checked with white lines.
These
include a 20 mm wide (b6) line adjust the border of the playing surface to
guarantee that its cutoff points are unmistakably unmistakable, and a 3 mm wide
(b7) line, parallel to the sidelines, partitioning each one end of the table
into two half-courts.
4.8. Grating
of the playing surface
The element
Cof between the playing surface and that of any ITTF-sanction ball ought not to
be more noteworthy than 0.6. The Cof ought to be basically the same paying
little respect to the heading in which it is measured.
4.9. Skip on
the playing surface
Both speed
and twist of a ball are influenced by the strength of the playing surface and
different properties that together characterize the skip.
4.11.
Tallness conformities on the undercarriage
Tables of
sort (I) needn't bother with stature conformity gadgets due to their inflexible
structure.
Tables of
sort (II) to (IV) should have stature conformity gadgets at any rate at the
bottom of their end feet, however ideally likewise under their net finishes.
These ought to be simple and sheltered to handle, to modify and to settle
4.12. Shade
of the undercarriage
The
undercarriage ought not be white or fluorescent; its complete must not reflect
light upwards, so that the players and the observers are not astonished.
You may visit Ping Pong Paddles to get more information about Ping Pong.
0 Response to "Criteria for an official ITTF approved Tennis Ball Table"
Post a Comment